Buying Guides

Temperature and Humidity Monitoring for Cigar Shipping and Storage

Cigar importers and warehouse teams need temperature and humidity data at receiving, in the aging room, and in transit. Here is which logger fits each stage.

Cigar importers, distributors, and warehouse teams need temperature and humidity data at different points in the supply chain. At receiving, the team may need to review conditions during transport. In an aging room or bonded warehouse, the priority is tracking changes over time. For shipments that need closer oversight, an alert can prompt a check while the container is still in transit.
Relative humidity can change as temperature changes, so review both readings together when investigating fluctuations.
Figure 1. Cigars in an open cedar box at a shipment preparation area.

Review Shipment Conditions at Receiving with ZTAG-TH

For a single shipment, place one ZTAG-TH Single-Use USB Temperature & Humidity Data Logger at a representative monitoring point. Record the shipment reference, logger ID, and carton location before dispatch.
At destination, the receiving team can plug the logger into a computer to open the automatically generated PDF report when the device is configured for PDF output. No software installation is required to read it. If the report shows readings outside the agreed range, compare the start and end times with loading, unloading, and transfer records to identify which stage to check first.
Cigar shipping storage temperature humidity monitoring - FRESVUE

Figure 2. A ZTAG-TH logger at a cigar shipment receiving station.

Track Storage Conditions over Time with ZLOG-TH

Use the ZLOG-TH Reusable Temperature & Humidity Data Logger to record conditions in humidors, aging rooms, and bonded warehouses. To compare areas, place one logger near the door and another farther inside on a storage shelf.
Review both records alongside door openings, restocking, and equipment operation. If the same area shows repeated fluctuations, the records help identify when they occur and where to investigate.
Cigar shipping storage temperature humidity monitoring - FRESVUE

Figure 3. A ZLOG-TH logger monitoring conditions on a shelf in a cigar aging room.

Receive Temperature Alerts in Transit with ZTAG-20GTHS-LI

For shipments that need temperature alerts before arrival, deploy a ZTAG-20GTHS-LI 4G Real-Time Data Logger. Before dispatch, set the alert threshold and identify who will receive alerts and who will contact the carrier.
When the logger can report over a mobile network, a temperature alert can prompt the team to contact the carrier and check shipment conditions. On routes with limited coverage, including ocean crossings, check the latest reporting timestamp to see how current the platform readings are.
Cigar shipping storage temperature humidity monitoring - FRESVUE

Figure 4. Illustrative 4G monitoring setup for a cigar shipment inside a freight container.

Read next

More from the journal

Keep readers moving through related announcements, stories, and field notes.

euq-fruit-spoiled-poster-v5-1920x1080
Buying Guides

Fruit Arrived Spoiled. Who Pays?

A container of fruit shows up rotten. The buyer won't pay. The trucker swears his reefer was fine. Nobody can prove anything. That's the whole problem. One logger in every box ends the fight.

Read article