A laboratory cold room, a -80°C freezer, a pharma warehouse aisle — they share one problem: the person responsible for them cannot stand in the room at 3 a.m. This guide covers how continuous monitoring works in practice — what to measure, where to put the sensors, how often to record, and what an auditor will ask for.
Reusable loggers built for permanent duty
A shipment logger answers one question: what happened to this container? A facility logger answers a different one: has this room ever been out of range, and for how long? Auditors ask the second question.
FRESVUE's ZLOG-T and ZLOG-TH are built for that duty: replaceable battery, USB readout, and a housing that survives condensate and repeated sanitising. Where a room has no building management system, a 4G model reports continuously instead. How to monitor a laboratory cold room
A cold room is not one temperature. It is a volume with a door, a compressor, and shelving that blocks airflow. The reading near the evaporator and the reading on the bottom shelf of the far corner can differ by several degrees — and that corner is exactly where samples sit.
Placement comes first. Put one logger where the samples actually live: mid-height, away from the door, not against an outside wall. A second near the door catches what happens every time it opens. If the room is large or divided by shelving, add a third in the weakest corner — a mapping run (three or four loggers over 48 hours in a normal working week) shows you where that is.
Set the interval to 5–15 minutes. Faster burns battery without adding information; slower can miss a short door-open excursion. Use two-stage alarms: a warning at the edge of the acceptable range and an alarm at the limit, with a delay long enough to ignore a normal door opening — 10 to 15 minutes is typical.
Then the boring part auditors actually check: calibration records, a documented alarm response, and evidence that someone looked. A logger that records perfectly but nobody reads is not a monitoring system.
Warehouse temperature monitoring: what to record
Warehouses are harder than cold rooms because they are rarely uniform. A pharmaceutical warehouse may hold 2–8°C, 15–25°C and ambient zones under one roof; a food warehouse may have a chilled dock, a frozen chamber and a loading area open to the yard.
Start with a zone map: which areas are controlled, to what range, and where the boundaries sit — a doorway is a boundary. Then decide what each zone needs. A controlled storage area needs continuous logging; a transit corridor may only need a logger during the hours it is used.
Record temperature — and humidity if the product is humidity-sensitive — at a fixed interval, and keep every excursion, not just the ones that were resolved. Regulators and customers are usually less interested in whether you had an excursion than in whether you detected it, investigated it, and can prove what you did.
Retain the records for as long as your GDP or GxP procedure requires — commonly five years, or product shelf-life plus one — and keep them exportable. A system that traps data in a proprietary format becomes a liability at audit time.
Real-time remote viewing across every room
USB loggers are read after the fact. A 4G real-time logger reports while it still matters: temperature, humidity and location in the cloud, with email or app alerts when a room drifts. For a site without a permanent BMS — or for a room nobody walks past at night — that is the difference between finding out at 3 a.m. and finding out on Monday. The two coexist easily: USB loggers for rooms visited daily, real-time loggers for the ones that are not, and for weekends and holidays when the building is empty.
Audit-ready by default
An auditor's questions are predictable: show me the record for this room over this period; show me your alarm response; show me the calibration certificates; show me what happened when the compressor failed in March.
A monitoring setup answers all four if it produces four things: a continuous curve per location, an alarm log with acknowledgement, dated calibration certificates per device, and a signed PDF export that does not require the auditor to install anything. Configure it so that report takes five minutes, not five hours.
Which logger fits which room
Small cold room, visited daily: a reusable USB logger with a display. Large or remote site without a BMS: a real-time 4G logger with alerts. Humidity-critical rooms such as stability chambers: a temperature and humidity model. Ultra-low freezers: a device rated below -40°C — our separate guide covers that case.
Still weighing USB against real-time? We wrote the cost comparison here, and the lab freezer guide here. Tell us which rooms you need to cover and their temperature ranges — we will suggest a configuration and a placement plan: talk to FRESVUE.